Showing posts with label easy. Show all posts
Showing posts with label easy. Show all posts

Sunday, April 9, 2017

DIY Upholstered Twin Headboards The Easy Way!

DIY Upholstered Twin Headboards The Easy Way!



Ive got an update for you on the twin bedroom makeover at the river house! Little by little, pieces have been arriving for the room and today Ive got an update on the DIY Im doing for it: upholstered headboards. This is my third crack (and fourth I guess, since there are two twin beds in this room) at upholstering a headboard and this time I cheated. Yep, thats right, I took the easy way and it was SO worth it!

Want to know the secret behind this DIY? Purchasing an inexpensive, pre-made upholstered headboard from...youll never guess...Wal-mart, and reupholstering it in a pretty, bold fabric. Yall, this is the simplest upholstery project ever. If youve always wanted to DIY an upholstered headboard, but have been fearful of the whole process of building the frame and then adding foam, batting and fabric, this project is for YOU.

Supplies youll need:

  • Modway Region Twin Upholstered Headboard 
  • Staple gun
  • Approximately one yard of fabric (mine is Sherpa Ikat Coastal from Fabric.com)
  • Scissors
Heres what the upholstered headboard looks like right out of the box:


Boring and white and perfect for this project. At $59 (crazy, right?), this pre-made headboard was pretty much the same price as the wood, foam and batting I wouldve purchased to make a headboard from scratch, so buying it was a no brainer. The fabric is really cheap-looking polyester, but it doesnt matter because I covered it right up with pretty fabric! 

Upholstering this headboard was really straightforward. I started by placing the headboard face down on my fabric and lining it up on the pattern so it was straight and centered. Since this fabric has a repeat both vertically and horizontally, it was just a matter of shifting it around until it looked right.


Then I pulled the fabric from the edges onto the back of the headboard and added a single staple at 12 oclock, 3 oclock, 6 oclock and 9 oclock. 


I turned the headboard over briefly after adding those four staples to make sure the fabric still looked centered and straight from the front, then continued to pull the fabric taut and staple all the way around.

Corners can be a little tricky, but the two-fold method I use works beautifully and looks very crisp from the front. Heres how I do it:

First I grabbed the loose fabric right at the corner and folded it so that the excess is on the underside. I pulled that piece tight and laid it down flat at a 45 degree angle.


Next, while holding down that piece, I grabbed the remaining loose fabric and folded it under so that the fold at the top edge was parallel to the fabric thats already stapled down. I then laid that down flat on the piece I was holding at a 45 degree angle. I used one hand to hold it all together while I used the other to add a few staples to keep everything in place.


These are the key staple placements to keep those folds in place:


Its kind of like wrapping a present, but you have to mess with the fabric a little bit to get it to lay smooth and flat.

Then I trimmed the excess fabric off from the edges, attached the legs and voila, I was done! 


Hello pretty headboard!


I love how they turned out. It was definitely worth it to take the shortcut with this project. The headboards really will be the focal point of the room with that zippy, fun fabric. Each one took maybe 30-45 minutes to do, so that means I whipped out two upholstered headboards in only a couple of hours - thats a winner in my DIY book! Even if youre not a DIYer, I encourage you to try this method if youre in the market for an inexpensive upholstered headboard (each one cost approximately $75 total). If youre feeling more adventurous and would like to build the frame yourself, check out my post on how to do that here.

Ill be putting the twin bedroom together this week. I cant wait to share the results with you soon!


Curious about the before photos and design plan for this room? Check out the intro post for details!




Enjoy what you read today?  Enter your email address below to subscribe to May Richer Fuller Be!


Delivered by FeedBurner

Available link for download

Read more »

Friday, February 17, 2017

DIY Easy Faux Roman Shade

DIY Easy Faux Roman Shade



A little over a month ago, I had the pleasure of guest posting for Carrie at Lovely Etc. while she was spending time with her new little baby boy. I love guest posting and Carries blog is awesome, so it was a win-win! In case you missed that post, I thought Id share my project - an easy DIY faux roman shade - over here too.

I work from home for my day job in healthcare, so that means I spend about eight hours a day in my office. Over the year or so weve lived here, Ive had a blast turning it into a space that I love. Its light and bright - my favorite combination! And while bright is almost always a good thing, for a couple of hours in the afternoon the sun shines so brightly that its blinding. I was in desperate need of a window treatment that would filter that bright sunlight, but not take away too much of that precious natural light from the one window I have in there.

To see more of my office, check out this post!

Since my desk sits under that window, traditional full-length curtains werent an option, so I decided to DIY a simple faux roman shade for it. Yall, this was such an easy project - and its renter friendly for those of you in that category! This faux roman shade is perfect for a window where you dont necessarily need privacy, but do need to block some light. Youll see why in a minute.

Here are the supplies youll need to make a faux roman shade:
  • A piece of fabric cut 2" wider than the width of your window and 4" longer than the height of your window
  • Sewing machine or hem tape (*affiliate link)
  • Small tension rod (*affiliate link)
  • Adhesive Velcro squares (*affiliate link)
Step 1: Hem your fabric on three sides so that it fits snugly inside the width and height of your window. I used a sewing machine, but if youre sewing-averse (or dont have one), iron on hem tape works great too. 

For the fourth side, create a small pocket that is slightly larger than the diameter of your small tension rod. You can see the pocket I made below on the right side of this photo and the next photo below. 



As a side note, I picked this piece of fabric up from the remnant bin at one of my favorite local fabric stores. The remnant bin is a great way to get a pretty piece of fabric for a deep discount for small projects like this!

Step 2: Lay your fabric down and create the folds for the roman shade. I didnt measure these - I eyeballed it and created two folds for the look I wanted. Adjust the folds according to how much of the window you want to cover in "default mode." Remember, this faux shade only has two settings - fully up or fully down - so plan your folds accordingly!


Step 3: While the fabric is laid flat and folded, take your adhesive velcro squares and stick them to the inside tops of the folds along the edges first (make sure you stick them in the areas that hold the weight of the folds!). These Velcro squares keep the folds in place once its hanging up. Then add two or three more squares across the middle areas to support the rest of the width of the fabric folds. I used four squares total across each fold and that holds up the shade beautifully. The Velcro packaging says the adhesive is not made for fabric, but I decided to throw caution to the wind and try it ;). Its working great so far! If I ever feel like the adhesive isnt strong enough, Ill just add a dab or two of fabric glue to make em stick. (**Update! The velcro adhesive didnt end up being strong enough for the fabric, so I just dabbed a little fabric glue on them and theyre good to go. Nothing like a little trial and error to get it right!)

I realize its hard to understand where to attach the velcro in words, but heres one example of where I attached mine - hope this helps you visualize it! This is the view from the backside of the fabric.


Step 4: Insert your small tension rod and hang your pretty new faux roman shade! Heres my finished project:


I love how this turned out. Its perfect for my needs (and I hope a few of yours as well!) and its simple - no fancy lining and sewing is optional! I used Velcro so that Id have the ability to pull down the shade if I need to, but thats a rare need for my situation. Nearly all of the time itll stay just like you see in the photo above. This project only took me about an hour, which was time well-spent for some much needed function and style for my naked window :). I hope yall will try this project out next time you need a roman shade as a window treatment!


If you enjoyed this project, check out a few more of my favorite DIYs!
  • DIY Upholstered Headboard - The Easy Way!
  • Metal Card Catalog to Side Table Makeover
  • How To Transform a Dated Brass Light Fixture

Available link for download

Read more »