Showing posts with label curtains. Show all posts
Showing posts with label curtains. Show all posts

Monday, April 24, 2017

DIY Custom French Pleat Curtains

DIY Custom French Pleat Curtains


When we chose the dark blue paint color (Benjamin Moore Evening Dove) for our master bedroom a few months ago, we decided that we would hang white curtains from floor to ceiling to make the room feel lighter. The room has a vaulted ceiling, but I loved the high contrast look of the tall white curtains in other rooms. 

Shopping for curtain panels can be a pain... you need to find the correct length, material, and sometimes you get stuck between options like tap-top or grommets... which can be right for certain rooms and situations, but wasnt what I was looking for. I decided that I wanted either back-tab curtains or French pleat (pinch pleat).  Panels like these vary widely in cost, but a lot of times you will spend a lot of extra money just to get the pleat look. Well, heres a great and surprisingly cheap option for you to make your own French Pleat curtains using Ikea Ritva curtain panels. 

A pair of Ikea Ritva panels comes in either 98" or 117" lengths, so you get a lot of fabric for the low cost (you can always hem them to be shorter, if needed). I bought the 98" length and Im really happy with how they look. Heres how I created the French Pleats.
 You will need to buy the panels from IKEA and then buy triple pleat hooks (like these) from somewhere like JoAnn Fabric or on IKEA does sell some pleat hooks, but they are double pleat hooks and wont give you the same effect. If you want the triple pleat, you will need to buy the 4-pronged pins.
The nice thing about using the Ritva curtain panels, is that they have built in pleater tape into the header of the curtain. (If you are doing this with another kind of panel, you will need to sew this pleater tape into the top section of the curtain yourself) This means that you can create almost any design of pleats that you want... you just need to figure out where to put your hooks.
To start, put one of the prongs into a slot in the header.  Then, depending on how deep you want the pleats, place the second prong into another slot. Continue this until you have your finished single pleat.  Before you start your panel, you will want to decide how big you want each pleat to be and how much space you want to leave in between pleats. For my curtains, I had 5 pleats (each created out of 8" of panel width) leaving about 3" between each. On the ends, you can put a single pin in a slot to keep the panel ends neatly attached to the rod.
 When you are done, it looks like this:
Then, you just need to either attach the hooks to rings and hang them, or use the rings directly on your rod.
There you go! Im pretty excited about the way they turned out. I still need to do a lot more in this room, but having curtains up already makes it feel so much nicer!

Available link for download

Read more »

Wednesday, January 25, 2017

Dining Room Curtains

Dining Room Curtains


Over the weekend, I made the curtains for the dining room. I had previously ordered the fabric and drapery lining from LS Fabrics in Atlanta. Wow, this was a big project, but it was definitely a rewarding one!



I decided to make back-tab panels because I didnt want the ruched look of rod pocket drapes but I didnt think I had enough skill to make pinch pleats. I made these with a no-sew method and used only Stitch Wichery to hem and bond the fabric together. I may go over some of the seams with the sewing machine in the future, but for now, these drapes look great and are serving their purpose. This is a great way to easily create curtains for your home and the no sew technique works great if they will be dummy panels that you dont intend to pull across the window.

First, I started out by measuring and cutting both of my panels of fabric. I wanted curtains that were 106" long  so I cut pieces of fabric that were 112", allowing 3" hems for the top and bottom.



Then, I used the Stitch Witchery to hem the sides of the fabric panels. I folded over 3/4" down both sides.


 At the bottom and top of the panels, I hemmed about 3" to make the panels the correct length. Be sure to check that your panel is square and your fabric is how you want it at this stage.


At this point, I had hemmed the top, bottom, and sides of the fabric panel. Heres what they looked like laying out on the floor.

I wanted to add a fabric lining to these curtains so they would look more polished and not look flimsy on the wall.  I cut the lining to fit just inside the panel, "sewed" it to the top of the panel and then folded the seams of the fabric over onto the lining, ironing the Stich Wichery to hold it in place.


Then, I hemmed the bottom of the lining so that it laid over top of the hemmed fabric.  


At that point, I was almost done. I then added tabs on the top of the fabric, at the right height, so that I could slide my curtain rod through. I dont have a picture of that, but basically it looks like strips of fabric on the back that the rod slides through.

And, heres the finished product:




Some of these pictures were taken at night, so the lighting and color of the room is a bit off. Heres a daytime picture:



Kevin and I are really happy with the result. It was a lot of work making these curtains, but we think they really look nice in the room. Its also amazing how much bigger the room feels with these floor to ceiling curtains.  They add drama and a point of interest in the room.

Shared at:

The DIY Show Off,  and Todays Creative Bloghttp://typeadecorating.blogspot.com/

Available link for download

Read more »