Showing posts with label appliqued. Show all posts
Showing posts with label appliqued. Show all posts

Monday, May 29, 2017

DIY Appliqued Ghost Tee

DIY Appliqued Ghost Tee



Photo courtesy of Laura Winslow Photography

With Halloween just around the corner, I thought Id share my super easy tutorial to make an appliqued ghost t-shirt (or sweatshirt). This tee was a huge hit when I sold it in my shop.


My design aesthetic is really simple and clean so my designs are never complicated or fussy. If you prefer, you can just as easily draw out your own ghost or other Halloween character and follow the same instructions. If this is your first time appliqueing, this project will take you about an hour. (If you are familiar with my applique tutorials, the instructions are the same so you can just grab the template and run with it.)

Youll need the following:

blank t-shirt, one piece, or tank
felt or fabric piece for the applique (I prefer to use eco-fi felt)
 embroidery floss
scissors (small scissors with a pointy tip work best)
fusible webbing (I prefer to use heat n bond)
 template for the applique (download here)

Since I use Heat n Bond, my instructions will follow Heat n Bonds instructions. If you are using a different fusible web, simply change out my instructions with the instructions on the package. If you have any questions, dont hesitate to contact me and I can help you.
The first thing youll want to do is take your ghost template and place it under a sheet of your fusible webbing. Take your pencil and trace the ghost on to the webbing so it looks something like this: 
Next youll want to iron your "ghost" webbing onto your felt or fabric. For Heat n Bond, set it on the "wool" setting (NO STEAM). Iron the design onto the felt or fabric for about 3 or so seconds so it looks like this:


Carefully cut the applique out. Small scissors with a pointy tip work best.


Take the applique and peel off the wax paper layer from the back. Place the applique exactly where you want it on the t-shirt with the glossy/fusible webbing side face down. Iron the applique on to the t-shirt pressing for about 10 seconds. Again be sure to use the wool setting with no steam. Check to be sure that the applique is firmly adhered to the shirt.

Now that your ghost is attached to the t-shirt, youre ready to start the applique process. You can do this with a machine or by hand. Im a hand stitcher  - I find it very relaxing and therapeutic. To stitch by hand, cut about 3-4 feet of your black embroidery thread. Your skein of thread will have six strands. Separate two of the strands from the piece youve cut and thread them through your needle.
For the ghost, I use a straight stitch. Its a basic stitch and great for a beginner. You basically bring the needle up through the t-shirt and back down making straight little stitches about a 2 cm in from the edge of your applique. 
 
A great video tutorial for the straight stitch is available here. The nice thing about sewing coordinating thread (floss) on felt or fabric is that its hard to see so its very forgiving if youre a beginning stitcher. If youre an experienced hand stitcher, it is fun to experiment with contrasting threads and different stitches.
 Once youve finished with the stitching, youre done! You can take these same principles and make a ton of other spooky creations - ghosts, bats, witches, etc.

If you give this a shot, Id love to see the results! Please take a picture and email me at finleyandoliver@gmail.com. And again, if any of you get stuck, please dont hesitate to email me for help.

Available link for download

Read more »

Wednesday, April 12, 2017

DIY Appliqued Dream BIG Tee

DIY Appliqued Dream BIG Tee


I wanted to make an updated version of my original dream BIG tee for the boys (this is a great design for girls too). The previous font I used was when I was on a big circus kick. This time around, I wanted to update the font to something a little more modern and clean. I love how it turned out and apparently, Oliver does too.



The technique for this is very similar to my appliqued love tutorial - just a bit more involved and time consuming since there are more letters.  

What youll need:
Blank t-shirt, one piece, or tank (pre-washed)
Felt or fabric piece for the applique (I prefer to use eco-fi felt by Kunin - it holds up great in the wash)
  Embroidery floss and needle
Scissors (small scissors with a pointy tip work best)
Fusible webbing
  Template for the applique (download here). Adjust the size of your template as needed. If youre intimidated with the detailed lettering, blow it up a bit - that will make it easier.


Since I use Heat n Bond, my instructions will follow Heat n Bonds instructions. If you are using a different fusible web, simply change out my instructions with the instructions on the package. If you have any questions, dont hesitate to contact me and I can help you. 

Getting Started:

The first thing youll want to do is take the template and place it under a sheet of your fusible webbing. Take your pencil and trace "dream big" on to the webbing. With the "dream," I made the lines connecting the letters together slightly bigger when I traced so it would be easier for stitching. Any time you applique letters or numbers, youll want to trace them in the reverse since you will flip them when you adhere them to your garment.


Next youll want to iron your webbing onto your felt or fabric. For Heat n Bond, set it on the "wool" setting (NO STEAM). Iron the design onto the felt or fabric for about 3 or so seconds so it looks like this:


Carefully cut the appliques out. This applique is a bit detailed so having small, pointy tip scissors will come in handy here.  I use the micro-tip scissors from Fiskars and they work great.



Place the appliques exactly where you want them on the t-shirt with the glossy/fusible webbing side face down. Iron the applique on to the t-shirt pressing for about 10 seconds. I ironed "dream" first and then BIG second. Again be sure to use the wool setting with no steam. Check to be sure that the appliques are firmly adhered to the shirt.


Now that your appliques are attached to the t-shirt, youre ready to start the applique process. To stitch by hand, cut about 3-4 feet of your embroidery thread. Your skein of thread will have six strands. Separate two of the strands from the piece youve cut and thread them through your needle.
For this t-shirt, I use a straight stitch. Its a basic stitch and great for a beginner. You basically bring the needle up through the t-shirt and back down making straight little stitches about a 2 cm in from the edge of your applique.


A great video tutorial for the straight stitch is available here. The nice thing about sewing coordinating thread (floss) on felt or fabric is that its hard to see so its very forgiving if youre a beginning stitcher. If youre an experienced hand stitcher, it is fun to experiment with contrasting threads and different stitches.

Once you have finished stitching all of the appliques, you are finished. You could play around with different colors or even create your own design using different fonts.


If you get stuck or have any questions, please let me know.




Available link for download

Read more »

Monday, April 3, 2017

DIY Appliqued Love Tee

DIY Appliqued Love Tee


One of my most popular Finley and Oliver tees was my little love tee. Im making a love one piece for a friends baby and thought Id document the process and turn it into a tutorial. 


With a little practice and patience, making this little one piece (or tee or tank, etc.) is super easy. It makes a precious gift or cute little piece of clothing for your kiddos. If this is your first time appliqueing, this project will take you about an hour.

Youll need the following:

blank t-shirt, one piece, or tank
felt or fabric piece for the applique (I prefer to use eco-fi felt by Kunin - it holds up great in the wash)
 embroidery floss
scissors (small scissors with a pointy tip work best)
fusible webbing (I prefer to use heat n bond)
 template for the applique (download here)


(The template is backwards because the image will be reversed once youve put your applique together. This is important to remember any time you are appliqueing numbers and letters - not so much when youre appliqueing other things.)

Since I use Heat n Bond, my instructions will follow Heat n Bonds instructions. If you are using a different fusible web, simply change out my instructions with the instructions on the package. If you have any questions, dont hesitate to contact me and I can help you.

The first thing youll want to do is take your love template and place it under a sheet of your fusible webbing. Take your pencil and trace love on to the webbing so it looks something like this:


Next youll want to iron your "love" webbing onto your felt or fabric. For Heat n Bond, set it on the "wool" setting (NO STEAM). Iron the design onto the felt or fabric for about 3 or so seconds so it looks like this:


Carefully cut the applique out. This applique is a bit detailed so having small, pointy tip scissors will come in handy here.


Take the applique and peel off the wax paper layer from the back.


Place the applique exactly where you want it on the t-shirt with the glossy/fusible webbing side face down. Iron the applique on to the t-shirt pressing for about 10 seconds. Again be sure to use the wool setting with no steam. Check to be sure that the applique is firmly adhered to the shirt.

Now that your love is attached to the t-shirt, youre ready to start the applique process. You can do this with a machine or by hand. Im a hand stitcher  - I find it very relaxing and therapeutic. To stitch by hand, cut about 3-4 feet of your embroidery thread. Your skein of thread will have six strands. Separate two of the strands from the piece youve cut and thread them through your needle.

For this t-shirt, I use a straight stitch. Its a basic stitch and great for a beginner. You basically bring the needle up through the t-shirt and back down making straight little stitches about a 2 cm in from the edge of your applique. 



A great video tutorial for the straight stitch is available here. The nice thing about sewing coordinating thread (floss) on felt or fabric is that its hard to see so its very forgiving if youre a beginning stitcher. If youre an experienced hand stitcher, it is fun to experiment with contrasting threads and different stitches.


Once youve finished stitching, you are done! Super easy, right?? Sky is the limit now! You can take these same principles and try out different fonts, words, animals, etc.


Jonas & Treat Photography


Jonas & Treat Photography

If you give this a shot, Id love to see the results! Please take a picture and email me at finleyandoliver@gmail.com. And again, if any of you get stuck, please dont hesitate to email me for help.

Available link for download

Read more »

Wednesday, March 22, 2017

DIY BE Appliqued Tees

DIY BE Appliqued Tees



This is going to be one of the very few tutorials I post over the summer and Im really excited to share it with you. My good friend Laura of Laura Winslow Photography and I were chatting over dinner a few weeks ago how our little guys (both just 5 years old) are *already* starting to feel pressure from friends and classmates to act a certain way, hang out with certain kids, or do certain things. We both feel strongly (really, Im sure most parents do) that its our job to give them the confidence and sense of self worth that they need to be comfortable with who they are. We came up with these designs and this super fun shoot to help our kiddos learn to embrace who they are and let their unique personalities really shine. 


Laura is not only an amazing photographer, but she is the one person who can really get my kids to be themselves in front of the camera.  They had such a blast with this shoot and it was so fun to see Laura in action. Im pretty sure her mantra is BE AWESOME - because she totally is. To see more photos from our fun day (and to read a far more eloquent reasoning behind this idea), you can visit Lauras blog here. Take your time. Its pretty amazing.



We thought it would be fun to create a tutorial of this and share these three designs with you all. Yay for you! Aside from the designs you see in these photos, you can create so many others...BE UNIQUE, BE YOURSELF, BE HAPPY, etc. I kept these designs short so I didnt have to sew too many letters. 

What Youll Need:

Blank t-shirt, one piece, or tank (pre-washed)
Felt or fabric piece for the applique (I prefer to use eco-fi felt by Kunin - it holds up great in the wash)
  Sewing Machine or embroidery floss and needle
Scissors (small scissors with a pointy tip work best)
Fusible webbing
  Templates for the applique (download here - BE RAD, BE COOL, BE KIND). Adjust the size of your template as needed. 


 Since I use Heat n Bond, my instructions will follow Heat n Bonds instructions. If you are using a different fusible web, simply change out my instructions with the instructions on the package. If you have any questions, dont hesitate to contact me and I can help you. 

Getting Started:

The first thing youll want to do is take the template and place it under a sheet of your fusible webbing. Take your pencil and trace your letters on to the webbing. Any time you applique letters or numbers, youll want to trace them in the reverse since you will flip them when you adhere them to your garment.


 Next youll want to iron your webbing onto your felt or fabric. For Heat n Bond, set it on the "wool" setting (NO STEAM). Iron the design onto the felt or fabric for about 3 or so seconds so it looks like this:


Carefully cut out your letters. Peel off the paper backing.


Place the letters exactly where you want them on the t-shirt with the glossy/fusible webbing side face down. Iron the appliques on to the t-shirt pressing for about 10 seconds. I ironed BE first and then KIND second. Again be sure to use the wool setting with no steam. Check to be sure that the appliques are firmly adhered to the shirt.


At this point, you can either hand stitch the letters using a basic straight stitch (great tutorial here) or you can use a sewing machine. I usually prefer to hand stitch but for this project I used my machine. If you use your machine, youll do a running stitch just inside the border of each letter.


Once the letters are stitched, trim the thread and you are finished.


Easy, fun, cute, encouraging.


 As always, if you get stuck on a step, feel free to let me know so I can help!
A HUGE thank you to Laura Winslow Photography for these amazing photos and designs.

Available link for download

Read more »

Wednesday, February 1, 2017

DIY Appliqued St Patricks Day Tee

DIY Appliqued St Patricks Day Tee


I meant to get this posted a couple of weeks ago but I am swamped and time got away from me. So sorry about that. This little applique is *super* easy. Perfectly simple and cute for a St. Patricks Day tee (or onesie, tank, etc.)

(If you are sick to death of my applique tutorials, check back next week. Im working on the cutest decorations for a birthday party and Ill be sharing the tutorial soon.)


Materials
  • Blank one piece, t-shirt, tank, etc. (pre-washed for shrinkage)
  • Felt or fabric for appliques - if you are using felt, I strongly recommend eco-fi felt by Kunin. Its made from recycled bottles and holds up really well in the wash.
  • Heat n Bond or other fusible webbing
  • Scissors
  • Embroidery floss and needle (or you could sew by machine)
  •  Shamrock template - free one for personal use here 


Getting Started 
 (Since I use Heat n Bond, my instructions will follow Heat n Bonds instructions. If you are using a different fusible web, simply change out my instructions with the instructions on the package.)

Print out your template and place it underneath your fusible webbing. Trace the design onto your fusible webbing. If you are going to put a heart on your tee, just free hand one onto your fusible webbing (dont draw it on the shamrock - draw it next to it).


Next youll want to iron your fusible webbing onto your felt or fabric. For Heat n Bond, set it on the "wool" setting (NO STEAM). Iron the design onto the felt or fabric for about 3 or so seconds so it looks like this: 


Cut out your appliques. Take your appliques and peel off the wax paper layer from the back. Place the shamrock exactly where you want it on the t-shirt with the glossy/fusible webbing side face down. Iron the applique on to the t-shirt pressing for about 10 seconds. I like to use a scrap piece of fabric over the applique when I press it just to be safe. Again be sure to use the wool setting with no steam. Check to be sure that the applique is firmly adhered to the shirt.


Take the heart and place it where you want on the shamrock. Iron it using the same steps above.


Now that your love is attached to the t-shirt, youre ready to start the applique process. You can do this with a machine or by hand. To stitch by hand, cut about 3-4 feet of your embroidery thread. Your skein of thread will have six strands. Separate two of the strands from the piece youve cut and thread them through your needle.

For this t-shirt, I used a straight stitch. Its a basic stitch and great for a beginner. You basically bring the needle up through the t-shirt and back down making straight little stitches about 2 cm in from the edge of your applique. 
Sew the shamrock first and then follow up with the heart. Ill admit that I didnt have a chance to stitch the heart - I ran out of white embroidery floss!! Its on the list for my next supply run.
If you get stuck, comment here or message me at finleyandoliver@gmail.com. And dont forget to check back next week for a new tutorial (that has nothing to do with applique!). ;)

Available link for download

Read more »